Hello friends today I will show how create a 3d soda pop tutorial graphics
I have used following techniques shown below in this 3ds max tutorial.

[1]-First of all you will press (ctrl +N) now you will see the new window is open
Click on the Geometry > Extended primitives > Chamfer cylinder.
Create a box with the following size
(Radius: 81.0) (Height: 148.0) (Fillet: 0.89)

[2]-Now apply the Taper modifier and use the following setting

[3]-Open the material window and click on the diffuse map button
Select the bitmap option and now pick the map like this
Assign to the object

[4]-Now apply the UVW Map modifier and select the cylinder option
Use the following setting

[5]-Create a cylinder with the following size
Put the cylinder on the chamfer cylinder

[6]-Select the cylinder and convert into the Editable poly
Select the polygon mode with the Ignore back facing

[7]-select the polygon and apply the Bevel polygons
Use the following setting

[8]-Apply the Turbo Smooth Modifier with the (Iteration: 3.0)

[9]-Create a tube with the following size
Set like this

[10]-Use the following setting now create hose like this

[11]-Apply the Bend modifier and use the following setting

[12]-Create a cylinder with the following size

[13]-Now convert into the Editable poly and select the polygons
Apply the Extrude Polygons with the (Extrusion Height: 1.5)

[14]-Apply the Turbo Smooth modifier with the (Iteration 3.0)

[15]-Create a line and open the Rendering palette and use the following setting

[16]-Set the skylight with the following parameter

[17]-This is final image after rendering

discuss this topic to forum