| This segment of tutorial exercise provides step by step instruction on creating a torus in AutoCAD. |
| 1) Open new AutoCAD session {Learn how a new session can be started by seeing this link} and click¡°Torus¡± tool from toolbar as shown in Figure 1 or go to draw menu at the top of the application window to select ¡°Torus¡± as shown in Figure 2 or type ¡°Torus¡± in command line as shown in Figure 3. |
  |
| Figure 1. |
 |
| Figure 2. |
 |
| Figure 3. |
| 2) After selecting ¡°Torus¡± tool you would be prompted to specify center of Torus, I have entered 0,0 and 0 as shown in figure 4, now press enter in key board. |
 |
| Figure 4. |
| 3) After specifying center of the torus you would be prompted to specify radius of the torus, I have entered 50 as shown in Figure 5. After entering radius of the torus press enter in the key board. |
 |
| Figure 5. |
| 4) After specifying the radius of torus you would be prompted to specify radius of tube, I have entered 10 as shown in Figure 6. After entering radius of the tube press enter in the key board. |
 |
| Figure 6. |
| 5) The resultant solid torus would be as shown in Figure 7. |
 |
| Figure 7. |
| 6) Now select ¡°Flat Shaded¡± from view menu as shown in Figure 8 and the resultant part would be Figure 9. |
 |
| Figure 8. |
 |
| Figure 9. |
discuss this topic to forum
