| This segment of tutorial exercise provides step by step instruction on creating a wedge in AutoCAD. |
1) Open new AutoCAD session {Learn how a new session can be started by seeing this   |
| Figure 1. |
 |
| Figure 2. |
 |
| Figure 3. |
| 2) After selecting ¡°Wedge¡± tool you would be prompted to specify first corner of wedge, I have entered 0,0 and 0 as shown in figure 4, now press enter in key board. |
 |
| Figure 4. |
| 3) After specifying first corner of the wedge you would be prompted to specify corner of the wedge, I have entered 25 and 25 as shown in Figure 5. After entering the values for corner of the wedge press enter in the key board. |
 |
| Figure 5. |
| 4) After specifying the corner of the wedge you would be prompted to specify height of the wedge, I have entered 40 as shown in Figure 6. After entering height of the wedge press enter in the key board. |
 |
| Figure 6. |
| 5) The resultant solid wedge would be as shown in Figure 7. |
 |
| Figure 7. |
| 6) Now select ¡°Flat Shaded¡± from view menu as shown in Figure 8and the resultant part would be Figure 9. |
 |
| Figure 8. |
 |
| Figure 9. |
discuss this topic to forum
